How CM works

Customer Support

+421-2-5465-0242

send email >>

Online support - chat (bottom right)

Monitoring of environment (T, H, Watt, triggers ..)

Poseidon devices are units for monitoring of environment and transfer of messages and critical values through the network. The power, sensors and the network are all connected to them. The sensors' values can be viewed on the web, ro through network protocols (SNMP, XML, etc.). Poseidon increases the security of your devices and information by monitoring of the environment, where your technology is stored.

Wario devices provide solutions suitable for all environments, and even the most simple device (Wario Expander) defaultly offers, beside Ethernet connection and connection of standard sensors (Temperature, humidity), also switch (binary) sensors and what's unusual, it is equipped with outputs for control of devices. If it's necessary to monitor a larger area, with requirements for conditional device control, you should choose the Wario control unit as the essential element. The control unit also provides an independent SMS notification (through internal GSM module), which increases versatility of the device.


Poseidon

Wario

Poseidon

With use of the Poseidon device, you can measure and evaluate for example:

  •  temperature (some models support up to 10 T/H sensors and up to 1km away)
  •  humidity of the room or in the switch
  •  flooding or water presence
  •  main power outage
  •  the presence of smoke (with an integrated siren)
  •  the presence of gas and flammable substances
  •  opening of doors
  •  movement in the room
  •  flowrate of air in the blowers
  •  measuring/check of voltage (in the range between 0-15V and 0-25mA) etc.

Poseidon device

Linking Poseidon with Customer Monitor

Launch "Monitorconsole" by right-clicking the TRAY icon, select the item "Scheduler - Monitor console" and go to Watches. Press the button for adding a Watch, and enter the watch's name.

Addition of watch for environment monitoring using the Poseidon device

Image: Pridaniw watchu na sledovanie prostredia pomocou zariadenia Poseidon

In the watch's conditions, select Enviroment Monitoring (snmp). 

Condition of watch Enviroment Monitoring (snmp).

Image: Podmienka watchu Enviroment Monitoring (snmp).

Fill the item SNMP Agent, click on the button (binoculars) and Customer Monitor will automatically list out all sensors and contact sensors of the Poseidon device.

1. After setting Operator to "<,>" , use the number in the item "Value/Range“. (e.g.: 36.7)
2. After setting Operator to "in,out" , use the range in the item "Value-Range“. (e.g.: 35.1;   
36.9)
3. The item Hysteresis prevents oscillating (often state changes) near the limit value. The condition's state is changed, when the limit value is exceeded even with added/subtracted Hysteresis value.
4. The item resolution defines the rounding unit. The measured number is rounded to that unit (e.g. Resolution=0.5;  26.6 -> 26.5, 31.2 -> 31). We recommend to have it set to prevent sending of useless amount of values to the CM Server.
5. The item Retries states how many times should it try to connect after unsuccessful connection to the device..
6. The item Timeout means how long should it wait for response while being connected.
7. The items Test Period and Unit define the period for the condition's testing
8. After setting all items and saving the settings to WatchList, C-Monitor begins to collect information from the Poseidon device and send it to CM server.

Setup of sensors and conditions for evaluating data from the sensors

Image: Nastavenie senzorov a podmienok pre vyhodnocovanie údajov zo senzorov

You will then finish the wizard and add actions, which should be executed in case FAILED state will be evaluated, when it lasts and for OK state. After the wizard is finished, the watch will be added into the list. When it's added, press the save button.

Final watch for temperature measuring

Image: Výsledný watch pre sledovanie teploty

Wario

Using the Wario device, you can measure and evaluate for example:

  • temperature
  • humidity of the room or in the switch
  •  flooding or water presence  and much more

High versatility of this control unit is proven by its usage in systems for control of intelligent houses. Find out more at : http://www.wanet.cz/wario-system-komfortni-ovladani-domu/ 

Wario expander

 

Wario main unit 

Linking Wario with Customer Monitorom

Launch "Monitorconsole" by right-clicking the TRAY icon, select the item "Scheduler - Monitor console" and go to Watches. Press the button for adding a Watch, and enter the watch's name.

Addition of watch for environment monitoring using the Wario device

Image: Pridaniw watchu na sledovanie prostredia pomocou zariadenia Wario

Select Enviroment Monitoring (http) in the watch's conditions.

Watch condition Enviroment Monitoring (http).

Image: Podmienka watchu Enviroment Monitoring (http).

Fill the item URL (host, IP), click on the button (binoculars) and Customer Monitor will automatically list out all sensors and contact sensors of the Poseidon device.

1. After setting Operator to "<,>" , use the number in the item "Value/Range“. (e.g.: 36.7)
2. After setting Operator to "in,out" , use the range in the item "Value-Range“. (e.g.: 35.1;   
36.9)
3. The item Hysteresis prevents oscillating (often state changes) near the limit value. The condition's state is changed, when the limit value is exceeded even with added/subtracted Hysteresis value.
4. The item resolution defines the rounding unit. The measured number is rounded to that unit (e.g. Resolution=0.5;  26.6 -> 26.5, 31.2 -> 31). We recommend to have it set to prevent sending of useless amount of values to the CM Server.
5. The item Retries states how many times should it try to connect after unsuccessful connection to the device..
6. The item Timeout means how long should it wait for response while being connected.
7. The items Test Period and Unit define the period for the condition's testing
8. After setting all items and saving the settings to WatchList, C-Monitor begins to collect information from the Wario device and send it to CM server.

Setup of sensors and conditions for evaluating data from the sensors

Image: Nastavenie senzorov a podmienok pre vyhodnocovanie údajov zo senzorov

Setup of sensors and conditions for evaluating data from the sensors

Image: Nastavenie senzorov a podmienok pre vyhodnocovanie údajov zo senzorov

You will then finish the wizard and add actions, which should be executed in case FAILED state will be evaluated, when it lasts and for OK state. After the wizard is finished, the watch will be added into the list. When it's added, press the save button.

Images: 
Zariadenie PoseidonPridaniw watchu na sledovanie prostredia pomocou zariadenia PoseidonPodmienka watchu Enviroment Monitoring (snmp).Nastavenie senzorov a podmienok pre vyhodnocovanie údajov zo senzorovNastavenie senzorov a podmienok pre vyhodnocovanie údajov zo senzorovVýsledný watch pre sledovanie teplotyWario expanderWario hlavná jednotkaPridaniw watchu na sledovanie prostredia pomocou zariadenia WarioPodmienka watchu Enviroment Monitoring (http).Nastavenie senzorov a podmienok pre vyhodnocovanie údajov zo senzorovNastavenie senzorov a podmienok pre vyhodnocovanie údajov zo senzorov